Price: ₹1,999 - ₹1,142.00
(as of Aug 28,2023 23:56:02 UTC – Details)

You can either put the spool on the thread spindle on top by raising it OR fill up the bobbin with thread and place it is position as shown in the picture. Whether you keep the thread on the spindle or Bobbin. The thread has to move through the pin as the first movement of thread. The next step is to take the thread to next thread guide over the tension adjusting screw and must be positioned between the two washers behind the tension adjusting screw. The thread should move to the Lever as per the image. Pull the thread down to thread guide and insert the thread from top downwards. Pull thread downward to the thread guide. If necessary, lower the needle to reach this thread guide by turning the handwheel slightly counter clock wise to lower the needle. Insert the thread through eye of the needle from the front towards the back of the machine. ( Use threader , if necessary ). If necessary raise the needle to reach the eye by turning the handwheel slightly clockwise. Pull about 10 inches of thread through the needle and lay it on the deck under the presser foot running in the direction away from you.